10 kW Hybrid Energy Storage System with 10 kWh LiFePO4 – Anker SOLIX X1 AIO

Complete Energy Storage System in One Tower – Anker SOLIX X1 10 kW / 10 kWh

If you plan a PV system, battery storage and backup power separately, you have to wrestle with compatibility questions, space requirements and installation effort. The Anker SOLIX X1 all-in-one system solves this in a single tower just 15 cm deep: a three-phase 10 kW hybrid inverter plus two LiFePO4 battery modules with a combined 10 kWh of storage capacity. The balanced solution for large detached homes with a heat pump or electric car.

Accepts Up to 20 kW of Solar Power

Thanks to 200 % oversizing, the integrated hybrid inverter handles up to 20 kW of PV power via two MPP trackers. The wide input voltage range of 140–950 VDC means the system starts feeding in even in weak morning light – and with a maximum efficiency of 98.1 %, almost all of it reaches your home.

Modular Expansion up to 30 kWh

If your needs grow – for example with a heat pump or electric car – simply stack additional 5 kWh X1-B5-H modules into the tower: up to six modules and 30 kWh total capacity, without modifying the existing system.

Backup Power When It Matters

If the grid fails, the system keeps supplying your home independently of the grid. Fridge, heating controls and internet simply keep running – ideally, your family won't even notice the power cut.

Safety at Cell Level

The LiFePO4 battery modules use one of the safest cell chemistries on the market. On top of that, there is a 0-volt transport mode and automatic isolation of faulty modules – a fault in one module does not bring down the whole system. The IP66 housing with C5-M corrosion protection allows indoor and weather-protected outdoor installation.

FAQ: Anker SOLIX X1 10 kW / 10 kWh

Can I expand the storage capacity later?

Yes, with additional X1-B5-H modules of 5 kWh each – up to six modules and 30 kWh per system; even a second battery tower is possible with a cable kit.

Does the system work during a power cut?

Yes, the integrated backup function automatically switches to off-grid operation when the grid fails and keeps supplying connected loads.

Where can the system be installed?

Thanks to IP66, C5-M corrosion protection and a depth of just 15 cm, it is suitable for garages, utility rooms, basements or weather-protected outdoor areas – wall- or floor-mounted.

Important Installation Note

Connection and commissioning must be carried out by a qualified electrical contractor. We'll be happy to advise you on the right system design.